The material in the feeding chute of the mill in the power plant is large, the impact force and temperature are relatively high, and the wear is extremely serious. This problem needs to be solved as soon as possible. In the past, manganese steel liners were used for protection, but their wear resistance was poor and they needed to be replaced frequently, which affected production
The production schedule increases the cost of the enterprise.
The abrasion resistant ceramic wear plate of Chemshun Ceramics fundamentally solve the wear problem of these equipment. The high-temperature impact-resistant wear-resistant ceramic liner is a toughened ultra-thick wear-resistant ceramic that is welded into the equipment by stud welding to form a strong wear-resistant layer. For the convenience of installation and replacement, the ceramic can be installed on the steel plate, and then installed on the equipment by welding or countersunk bolts. The stud welding technology is used to firmly fix the ceramics on the equipment, forming a good protective wear-resistant layer, and the ceramics are not easy to fall off.
Wear resistant ceramic lining has high strength, high hardness, strong wear resistance, can be pasted, welded and fixed, impact resistance, anti-falling function is obvious; temperature resistance, long life, is more than 30 times the life of ordinary steel, light weight, density It is more than 3.6g/cm3, which is only half of steel, which can greatly reduce the equipment load, is cheap, and can be used in a short time after construction. In addition, the wear resistant ceramic liner can also be connected to the steel plate first, and then welded to the steel plate of the machine. This method is convenient for construction and easy to disassemble, but relatively speaking the cost is high.
Post time: Feb-18-2023